|
|
|
|
| |
| ClipLight's *NO LONGER AVAILABLE*: |
ID:
715KITUS
|
 |
|
|
|
No need to open system. No need to replace o-rings seals or hoses. Unlike any other retrofit methods, PAG Plus rejuvenates and conditions o-rings and seals and stops porosity leaks in rubber hoses. There is no need to remove existing mineral oil in the A/C System.
Successful retrofit can be performed in less than 1 hour.
* Universal
Works on both R12 and R22 systems.
Compatible with all existing lubricants present in the system.Works on all makes of passenger vehicles and light trucks.
* Simplicity
No need to open system.
There is no need to change lines, seals, o-rings, gaskets, and receiver drier.
Disposable injector, with pre-measured 2 ounces of PAG Plus retrofitting additive.
Works and blends with existing lubricant in system to be compatible with 134A refrigerant, and fully lubricate the system.
* Cliplight's Retrofit System saves you time and money. Simply remove the R12 or R22 refrigerant using approved recycling equipment, inject the retrofit conditioner through the low side service port of the A/C system, install the retrofit fittings on the system's ports, and recharge the system with R134a.
* 715KIT
1 Retrofit Conditioner Injector
1 Low Side 7/16" Retrofit Fitting
1 High Side 3/8" Retrofit Fitting
1 Service Sticker
For use with 775 hose (included in kit)
|
| |
|
|
| |
| |
|
